No warps Magnesium tooling plate AZ31 sheet with fine flatness dimensional stability

No warps Magnesium tooling plate AZ31 sheet with fine flatness dimensional stability
 
XIAN YUECHEN METAL PRODUCTS CO. LTD. (XYMCO) produces the standard size magnesium CNC engraving plate / sheet as follows:
 
1.50 x 610 x 914mm;
1.75 x 610 x 914mm;
2.00 x 610 x 914mm;
3.00 x 610 x 914mm;
4.00 x 610 x 914mm;
4.50 x 610 x 914mm;
5.00 x 610 x 914mm;
6.00 x 610 x 914mm;
7.00 x 610 x 914mm;
10.0 x 610 x 914mm.
Or
1.50 x 500 x 1000mm;
1.75 x 500 x 1000mm;
2.00 x 500 x 1000mm;
3.00 x 500 x 1000mm;
4.00 x 500 x 1000mm;
4.50 x 500 x 1000mm;
5.00 x 500 x 1000mm;
6.00 x 500 x 1000mm;
7.00 x 500 x 1000mm;
10.0 x 500 x 1000mm.
 
XYMCO always maintains enough quantity magnesium CNC engraving plate / sheet in stock to make sure fast delivery, competitive price and excellent quality.
 
Why Magnesium Plate?
Magnesium CNC engraving plate has good carving processing performance. Because of its outstanding characteristics of magnesium plate engraving of low density, high specific stiffness, good damping property, environment friendly and no pollution, Recyclable good performance, known as the twenty-first Century green metal structure material.
 
The magnesium CNC engraving plate and mechanical processing of parts, in national defense, aerospace, electronic communication, rail transportation, medical equipment, printing plate, magnesium board carving mold and other fields, and has wide application prospect.
Magnesium CNC engraving plate as a kind of excellent metal material processing machinery and carving, has the following characteristics:
Cutting energy consumption with magnesium CNC engraving plate into 1, then 2.3 to 1.8 brass, aluminum, iron is 3.5; the cutting inertia is small it magnesium plate, can realize high speed cutting.
Magnesium CNC engraving plate, dimensional stability, not easy to change with temperature.
Non magnetic metal magnesium, magnesium plate shielding electromagnetic, strong anti-interference ability.
Magnesium has excellent damping properties, good damping.
Engraving magnesium board high specific stiffness. Magnesium the proportion of small, light weight.
Magnesium rich reserves of resources, recycling use.
Magnesium is widely exists in the nature, the magnesium CNC engraving plate can be naturally decomposed into magnesium salt, no harm to soil and water.
Magnesium CNC engraving plate adopts the carving process of high speed cutting has the following characteristics:
The feed speed engraving cutter can be improved more than 6 times; material removal rate can be increased by 5-6 times;
Magnesium aluminum plate surface roughness is greatly increased, up to 10 μ m
Generally, carving cutting resistance magnesium plate to reduce the 1/3;
Magnesium CNC engraving plate after hot deformation is low, can limit the work hardening;
Engraving tool durability increased nearly one times;
Magnesium CNC engraving plate processing time can be significantly reduced, directly led to reduced processing cost;
Cutting resistance magnesium plate of small, good thermal conductivity, heat quickly, so the cutting speed is very fast, very few sticky knives. Engraving and cutting tool life is long, and shortens the required tool replacement in the carving process downtime.
The chip formation in magnesium board carving process, associated with the shape of parts, alloy composition, feed speed and other factors. Because magnesium CNC engraving plate cutting, the chip integrity, continuous, general situation next finishing can meet the requirements of the carving surface roughness.
 
SPECIFICATIONS
ASTM B90/B90M-07
AMS 4375
AMS 4376
AMS 4377
 
CHEMICAL COMPOSITION
Al: 2.5-3.5%
Zn: 0.7-1.3%
Mn: 0.20 – 1.0%
Mg: Balance
 
PHYSICAL PROPERTIES
Density: 1.78
Coefficient of thermal expansion: 26.8 x 10^-6K^-1
Specific heat: 1040 Jkg^-1k^-1
Thermal conductivity: 76.9Wm^-1k^-1
Electrical resistivity: 92nΩm
Modulus of elasticity: 45 x 10⁹Pa
Poissons ratio: 0.35
Melting range: 566 - 632°C
 
HEAT TREATMENT
No thermal treatment is available for increasing the strength of this alloy after fabrication.
 
MECHANICAL PROPERTIES

The sheet and plate shall conform to the tensile requirements in above Table unless other agreement is made between seller and purchaser. Mechanical Properties for sizes and tempers not shown in above Table shall be as agreed upon by seller and purchaser.
 
OTHER PROPERTIES
Typical Hadness
O temper: 67 Rockwell E
H24 temper: 83 Rockwell E
 
WELDABILITY
Excellent weldability with gas shielded arc using AZ61A (preferred) or AZ92A filler rod; post weld stress relief is required to prevent stress corrosion cracking. Resistance welding is excellent.
 
MACHINING
AZ31B, like all magnesium alloy sheet and plate, machines faster than any other metal. Providing the geometry of the part allows, the limiting factor is the power and speed of the machine rather than the quality of the tool material. The power required per cubic centimeter of metal removed varies from 9 to 14 watts per minute depending on machining operation.
 
DENT RESISTANCE
Weight for weight, AZ31B-H24 has proven to be superior to competitive materials in its resistance to denting at moderate energy levels.
Dent Resistance of 1mm Gauge Sheet (Dent depth in mm from 25mm spherical redius indentor on 350mm span)
 

SURFACE TREATMENT
All the normal chromating, anodizing, plating, and finishing treatment are readily applicable. AZ31B also responds well to plasma electrolytic oxidation finishing.
 
CORROSION RESISTANCE
Continuous exposure for 2.5 years.
Marine Atmosphere
AZ31B-H24 0.008mg.cm^-2d^-1
Mild steel 0.323mg.cm^-2d^-1
 
Industrial Atmosphere
AZ31B-H24 0.013mg.cm^-2d^-1
Mild steel 0.055mg.cm^-2d^-1
 
Rural Atmosphere
AZ31B-H24 0.006mg.cm^-2d^-1
Mild steel 0.032mg.cm^-2d^-1